XT Keypad. Lupus Electronics LUPUSEC-XT1

XT Keypad

Product description:

1.

Power LED

2.

Status LED

3.

Error LED

4.

Arm

5.

Home

6.

System status



7.

Disarm

8.

Pound key #

9.

Star key *

Installation mode = PIN + *

10.

Emergency alarm: 7 + 9 (simultaneously)

11.

Fire alarm: 4 + 6 (simultaneously)

12.

Panic alarm: 1 + 3 (simultaneously)

13.

Battery breaker (delivery status)

14.

Mounting notches

15.

Tamper contact

Note:

The dual shortcuts 1+3(12.), 2+6 (11.), and 7+9

(10.) are disabled by default.

LED indicators:



Power LED:

o

Yellow LED lights up: active Test mode o

Yellow LED flashes: active Test mode + low battery o

Blue LED lights up for approx. 5 seconds: normal system status o

Blue LED flashes: Low battery

Note:



In normal operating mode, all LEDs are off.



If a key is pressed, the Power LED lights up for 5 seconds, thus signaling operational readiness.



Status LED (check system status of control unit with keypad):

If you press the Status



key on the keypad, the status of the control unit is checked. Soon after, the Status LED indicates the status:

Red LED lights up: System is armed

Red LED flashes: System is in Home mode

Blue LED lights up: System is disarmed

Blue LED flashes  error o

No response from control unit o

Incorrect PIN code o

Home activated in armed (away) mode

72