Mode Timer. Brother MFC-8370DN, MFC-8380DN

22

3

General Setup

Mode Timer

The machine has three mode keys on the control panel: Fax, Scan, and Copy.

You can set how much time the machine takes after the last Copy or Scan operation to return to Fax mode. If you choose Off, the machine will stay in the mode you used last.

This setting also sets the time the machine will change from individual user to the Public user when using Secure Function Lock. (See

Switching Users on page 31.)

(MFC-8380DN)

3

a

Press Menu, 1, 1.

b

Press a or b to choose 0 Sec, 30 Secs,

1

Min, 2 Mins, 5 Mins or Off.

Press OK.

c

Press Stop/Exit.

Paper settings

Paper Type

Set up the machine for the type of paper you are using. This will give you the best print quality.

a

Do one of the following:

„ To set the paper type for the

MP Tray

press Menu, 1, 2, 1, 1.

„ To set the paper type for Tray#1 press Menu, 1, 2, 1, 2.

„

To set the paper type for Tray#2

1

press Menu, 1, 2, 1, 3 if you installed the optional tray.

1

Tray#2 Only

or T2 appears only if the optional tray is installed. The optional tray is available for MFC-8380DN.

b

Press a or b to choose Thin, Plain,

Thick

, Thicker, Transparency or

Recycled Paper

.

Press OK.

c

Press Stop/Exit.

Note

You can choose Transparency for

Tray#1 and the MP Tray.

3

3

3