Cleaning the laser scanner window. Brother MFC-8370DN, MFC-8380DN

Cleaning the laser scanner window

C

WARNING

Use neutral detergents.

DO NOT use any flammable substances, spray or organic solvent/liquids containing alcohol/ammonia to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. For more

information see Important safety

instructions on page 103.

IMPORTANT

DO NOT touch the laser scanner window with your fingers.

a

Before you clean the inside of the machine, turn off the machine. Unplug the telephone line cord first, and then disconnect all cables and the power cord from the electrical socket.

b

Open the front cover and slowly take out the drum unit and toner cartridge assembly.

CAUTION

HOT SURFACE

After you have just used the machine, some internal parts of the machine will be extremely hot. Wait at least 10 minutes for the machine to cool down before attempting to clear the paper jam.

IMPORTANT

• To prevent damage to the machine caused by static electricity, DO NOT touch the electrodes shown in the illustration.

• We recommend that you place the drum unit on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.

c

Wipe the laser scanner window (1) by wiping it with a dry, lint-free soft cloth.

1

144