Changing TCP/IP Settings. D-Link AirPlus DP-G310, PS Admin

Print Server Administration User’s Guide

Where

ip-address

is the IP address you have assigned to the print server.

When you first telnet

to the print server, it displays its log-in message. At this point you can enter the password you have assigned to your print server. If you have not yet assigned a password, just press Enter.

The print server will then display the telnet

interface main menu.

Changing TCP/IP Settings

Once you have set the print server’s IP address for the first time

(using the method described above), you may wish to change the address or other TCP/IP configuration information such as the local network mask, or the default gateway. To change these

TCP/IP settings,

1. From the main menu, choose TCP/IP Configuration. The print server will display the TCP/IP Configuration menu.

84

Appendix: Telnet Interface Administration