Changing the Print Server Password. D-Link AirPlus DP-G310, PS Admin

Print Server Administration User’s Guide

Answer Y to confirm the save. The telnet

connection will drop, and the print server will reset itself, letting the new server configuration take effect.

Changing the Print Server Password

The print server password is used to protect the print server’s configuration from changes, either through the PS Admin program, or through the telnet

interface.

To change the print server’s password,

1. From the main menu, choose Server Configuration. The print server will display the Server Configuration menu.

[Server Configuration]

1 - Server Name <PS-142634>

2 - Location <Central office>

3 - Admin Contact <Benjamin Lin>

4 - Change Password

0 - Return to Main Menu

Enter Selection:

2. Choose the Change Password menu item. The print server will prompt for the old password:

Input Old Password :

If there is no password, just press Enter.

3. The print server will prompt you to enter the new password.

All password characters will be displayed as asterisks (

*

).

You will then be prompted a second time. Enter the same

Appendix: Telnet Interface Administration

87