Copying from a Camcorder. Samsung DVD-HR720

6-00819Q-AFR_76-91_REC 6/8/05 8:17 PM Page 81

Copying from a Camcorder

4

Press the

INPUT

button to select

DV

.

If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen.

DV

The DV device is connected.

You may control the Camcorder using the IEEE1394 (DV) interface.

1

Connect the DV output jack of your camcorder to the

DV input jack on the front of your HDD & DVD

RECORDER using a DV cable.

2

Press the

HDD

or

DVD

button.

If you select DVD, Press the

OPEN/CLOSE

button and place a recordable disc on the disc tray. Press the

OPEN/CLOSE

button to close the disc tray. Wait until

LOAD

disappears from the front panel display.

3

Press the

REC MODE

button repeatedly to select the recording speed(quality).

➞

SP

➞

LP

➞

EP

➞

XP

Record Mode SP 031:39

SELECT RETURN MOVE

5

Select the Play (

√

) icon on the upper part of the screen to playback the camcorder and find the starting position to copy.

You can press the

PLAY ( )

button of the remote control to play the camcorder.

6

To start recording, use the

œ √ buttons to select

Record (

●

) icon in the top side of the screen, then press the

OK

button.

You can press the

REC

button of the remote control to start recording. To display playback related icons on the screen, press any direction button on the remote control.

- To stop recording -

Press the

STOP ( )

button to stop or finish a recording in progress.

• When using DVD-RAM/-RW/-R discs, the message “Updating the information of disc.

Please wait for a moment” is displayed

English

- 81