LED and Beeper Indicators. Magellan 2300HS, 2200VS

LED and Beeper Indicators

The scanner provides a set of indicators that verify/announce the various scanner functions.

If You Make a Mistake...

If, during a programming session, you find that you are unsure of the scanner’s settings or wish to reset the scanner’s configuration, use the

Return to Factory Settings label below to return the scanner’s configuration to the factory settings. Scanning this label will also reset any changes made during previous programming sessions.

Return to Factory Settings

Scan this bar code to return the scanner to the default settings configured at the factory for the currently active interface. This bar code is typically used to return the scanner to a “known” operating state when the present programming status is not known, faulty, or suspect.

Use this bar code with caution, since it will reset ALL features that may have been programmed since the scanner’s installation.

CAUTION

NOTE

DO NOT scan the SWITCH bar code before and after scanning this bar code, as the bar code below automatically enters and exits Programming Mode as a part of its function. If this bar code is scanned following a SWITCH bar code, it will simply cause the scanner to exit

Programming Mode without making changes.

5-48

RETURN TO FACTORY SETTINGS

Magellan

2200VS/2200VS and 2300HS/2300HS

If You Make a Mistake...

Test Mode

NOTE

Use this feature to place the scanner into a testing, or “demo” mode. This special mode disables the scanner interface, meaning that bar code data is not sent out to the host via the scanner interface. This allows the bar code to be scanned continuously without requiring a response from the POS terminal.

To return the scanner to normal function, scan the TEST MODE = DIS-

ABLE bar code below.

DO NOT scan the SWITCH bar code before and after scanning the bar codes on this page.

Scanning the TEST MODE = DISABLE bar code sets the Double

Read Timeout to 600ms.

TEST MODE = DISABLE

TEST MODE = ENABLE

Product Reference Guide

5-49