advertisement
MSI/Plessey Enable
Enables/disables the ability of the scanner to decode MSI/Plessey labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH bar code.
MSI/PLESSEY = DISABLE
5-364
MSI/PLESSEY = ENABLE
Magellan
TM
2200VS/2200VS and 2300HS/2300HS
MSI/Plessey Enable
MSI/Plessey Check Character Calculation
Enables/disables calculation and verification of optional MSI/Plessey check characters.
If check character calculation is disabled, the risk is increased that a misread can occur. When disabled, any check characters in a bar code are treated as data characters.
NOTE
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH bar code.
MSI/PLESSEY CHECK CHARACTER CALCULATION = DISABLE
Product Reference Guide
MSI/PLESSEY CHECK CHARACTER CALCULATION = ENABLE
5-365
MSI/Plessey Number of Check Characters
Specifies number of MSI/Plessey check characters to be calculated and verified.
Check characters are always modulus 10.
NOTE
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code below representing the desired number of MSI/
Plessey check characters to be calculated and verified. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH bar code.
MSI/PLESSEY NUMBER OF CHECK CHARACTERS = 1
5-366
MSI/PLESSEY NUMBER OF CHECK CHARACTERS = 2
Magellan
TM
2200VS/2200VS and 2300HS/2300HS
MSI/Plessey Enable
MSI/Plessey Check Character Transmission
Enables/disables transmission of optional MSI/Plessey check characters.
This feature applies only when MSI/Plessey Check Character
is enabled.
NOTE
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH bar code.
MSI/PLESSEY CHECK CHARACTER TRANSMISSION = DISABLE
Product Reference Guide
MSI/PLESSEY CHECK CHARACTER TRANSMISSION = ENABLE
5-367
MSI/Plessey Label ID
This feature specifies an MSI/Plessey label ID to be added to bar code data.
The programming feature, Label ID Control, designates whether the
Label ID is transmitted as a prefix or suffix or if Label ID is disabled.
NOTE
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
below. You’ll need to cover any unused bar codes on this and the facing page to ensure the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
resent the desired Label ID characters; entered as two hex pairs. A
table containing the ASCII Character Set and their corresponding
Hex Values is available in the inside back cover of this manual.
ASCII parameters must be input by scanning a pair of hexadecimal digits for each character. Thus, to set a two-character value of AB, bar codes containing the digits ‘4’, ‘1’, ‘4’, and ‘2’ must be scanned.
The selectable range for this option is any hex value from 00 to FF.
4. Complete the programming sequence by scanning the SWITCH bar code.
5-368
SET MSI/PLESSEY LABEL ID
Magellan
TM
2200VS/2200VS and 2300HS/2300HS
MSI/Plessey Enable
MSI/Plessey Length Control
This feature specifies whether variable-length or fixed-length decoding will be set for MSI/Plessey.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH bar code.
You must now set the features MSI/Plessey Length 1
.
NOTE
MSI/PLESSEY LENGTH CONTROL = VARIABLE-LENGTH
Product Reference Guide
MSI/PLESSEY LENGTH CONTROL = FIXED-LENGTH
5-369
MSI/Plessey Length 1
Length 1 is the minimum label length if in variable length mode, or the first fixed length if in fixed length mode (see
) . Length includes the barcode’s check and data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
resent the desired label length. The selectable range for this option is
04 to 16. Pad all single digit numbers with a leading zero to yield a two-digit entry (04-16).
4. Complete the programming sequence by scanning the SWITCH bar code.
5-370
SET MSI/PLESSEY LENGTH 1
Magellan
TM
2200VS/2200VS and 2300HS/2300HS
MSI/Plessey Enable
MSI/Plessey Length 2
Length 2 is the maximum label length if in variable length mode, or the
second fixed length if in fixed length mode (see Code 93 Length Control
) .
Length includes the barcode’s check and data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
SET CODE 93 LENGTH 2 below. You’ll need to
cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
resent the desired label length. A setting of 00 will ignore this length
(only one fixed length), otherwise, the selectable range for this option is 04 to 16. Pad all singledigit numbers with a leading zero to yield a two-digit entry (04-16).
4. Complete the programming sequence by scanning the SWITCH bar code.
Product Reference Guide
SET MSI/PLESSEY LENGTH 2
5-371
MSI/Plessey Correlation
This feature enables/disables character correlation for MSI/Plessey.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar code.
MSI/PLESSEY CORRELATION = DISABLE
5-372
MSI/PLESSEY CORRELATION = ENABLE
Magellan
TM
2200VS/2200VS and 2300HS/2300HS
MSI/Plessey Enable
MSI/Plessey Stitching
Enables/disables stitching for MSI/Plessey labels. When parts of an MSI/
Plessey bar code are presented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’s software, and the data will be decoded if all bar code proofing requirements are met.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH bar code.
MSI/Plessey Stitching operates using fixed lengths ONLY. MSI/
MSI/Plessey Length 2 must be properly
configured for stitching to work.
NOTE
MSI/PLESSEY STITCHING = DISABLE
Product Reference Guide
MSI/PLESSEY STITCHING = ENABLE
5-373
MSI/Plessey Minimum Reads
Specifies the minimum number of consecutive times an MSI/Plessey label must be decoded before it is accepted as a good read.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option below or on the following pages. You’ll need to cover any unused bar codes on facing pages to ensure that the scanner reads only the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar code.
MSI/PLESSEY MINIMUM READS = 1
5-374
MSI/PLESSEY MINIMUM READS = 2
Magellan
TM
2200VS/2200VS and 2300HS/2300HS
MSI/Plessey Enable
MSI/Plessey Minimum Reads — continued
Remember to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.
MSI/PLESSEY MINIMUM READS = 3
Product Reference Guide
MSI/PLESSEY MINIMUM READS = 4
5-375
NOTES
5-376
Magellan
TM
2200VS/2200VS and 2300HS/2300HS
Appendix A
LED/Beeper Indications &
Controls
Speaker
Scan
Window
Indicator
LED plus
Volume/Tone
Push Button
shows the operator’s controls and indicators for both models.
The descriptions following identify the use or function of each component.
Figure A-1. Scanner Controls and Indicators
Model 2200VS
Upper Scan
Window
Indicator LED
Volume/Tone
Push Button
Lower Scan
Window
Top Cover
Model 2300HS
A-377
Product Reference Guide
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement