Status Screen in IEEE1394 Input Mode. JVC GY-HM710, GY-HM750

Item

H Audio Level Meter

I

J

K

Voltage/Battery

Power

Media Status

Operation Guide

Description

-20 dB -10 dB

Displays the audio level for CH-1 and CH-2.

The positions of -20 dB and -10 dB are displayed as A o B.

Memo :

● You can turn ON/OFF the display using [Audio Meter] of [Status Display] in the

[LCD/VF] menu. (A Page 91)

Displays the current status of the power supply in use.

Display

12.3V

Description

Currently powered by an AC adapter. The current voltage is shown on the right.

If the supplied voltage from the AC adapter is low, the voltage value will be displayed in red as a warning.

Currently powered by a battery.

When the battery power runs out, the battery mark appears hollow, and ARESB is displayed.

12.3V

200min

30%

RES

Memo :

● The display on the right can be set using [Battery Info] of [Status Display] in the

[LCD/VF] menu. (A Page 91)

PLAY : Playing

STILL : Still picture playback mode

FWD * : High-speed playback in the forward direction (* playback speed: 5x or 15x)

REV * : High-speed playback in the reverse direction (* reverse playback speed: 5x or 15x)

STOP : Stop mode

POFF : Power OFF

Displays a guide for the current operation buttons.

Status Screen in IEEE1394

Input Mode

These are the status screens displayed in Media mode (IEEE1394 Input mode).

STATUS 1 Screen

[Event/Warning Display Area] (A Page 101)

RES

* Appears only when a warning is displayed. [Voltage/Remaining Battery Power] (A Page 108)

STATUS 2 Screen

B

A

1280x720

24p HQ

[Event/Warning Display Area] (A Page 101)

282min

D C

107