Device Status. Black Box LEP0006A-UK, LEP0006A, LEP0002A, LEP0003A-UK, LEP0006A-EU, LEP0003A, LEP0003A-EU

PURE NETWORKING WIRELESS USB 10/100 PRINT SERVERS

Table 9-1. User name/password screen parameters.

Parameter Description

User Name Type in the user name.

Password Type in the password.

Save this password Check this box to save the password in your password in your password list list.

OK button Click on this button to save your changes.

Cancel button Click on this button to cancel your changes.

Once you enter the user name and password and click on OK, the Status screen

(with the System menu option selected) appears (see Figure 9-2). The top of the screen reads “Print Server” and three options, including Device Status, Setup

Wizard, and System Tools are listed horizontally below the Print Server heading.

On the left of the screen, the Status menu is listed vertically.

9.2 Device Status

Select each Device Status menu option, including System, Printer, TCP/IP,

NetWare, and AppleTalk, from the left side of the Status screen. Follow the instructions in Sections 9.2.1 through 9.2.5.

9.2.1 S YSTEM I NFORMATION

This page (see Figure 9-2) displays the print server’s general system information, including device name, print server name, model type, system up time, firmware version, MAC address, USB port number, LPT port number, and wireless LAN status. To get to this page, select System from the Status menu.

106