- Home
- Domestic appliances
- Climate control
- Space heaters
- STIEBEL ELTRON
- SHC 2.5
- Installation instructions
advertisement
OPERATION
REGISTER yOUR PROdUCT
3. Register your product
NOTE:
You must register this product within 90 days of purchase on our web site in order to activate any standard warranty or to be eligible for the extended warranty. Go to our website at: www.stiebel-eltron-usa.com and click on “Register
Your Product".
Before beginning the registration process, we suggest that you gather the necessary information as follows:
Model, Example: SHC 2.5 (from the label that is on the top of the unit in the center)
Number listed after “Nr.”
Place of Purchase
Purchase Date
First & Last Name
Email address
Physical Address
Phone Number
If you have any questions concerning the registration process or warranty options, please contact Stiebel Eltron
USA directly at (800)-582-8423.
4. General Description
These SHC water heaters can be used in most point-of-use applications. They are designed to supply hot water for hand wash and kitchen sinks in a residential, commercial or industrial environment.
These water heaters can replace traditional hot water systems which consist of a central hot water heater with hot water piping going to several draw-off points.
The SHC water heaters are lightweight and compact and manufactured for easy installation. The units are designed to be mounted on the wall. These units are designed to operate under normal street water pressure.
5. Technical Description
The pressure vessel of the water heater is welded glass-lined steel and is equipped with a sacrificial anode rod. The thermal insulation is made of polystyrene.
The water heater is equipped with both a thermostat and a high limit temperature switch. A temperature/pressure relief valve is supplied with the unit.
6. General Recommendations
The installation must be carried out by licensed professionals. All state and local codes must be adhered to.
The manufacturer will not be liable for any damages because of failure to comply with these installation instructions or because of improper installation performed by an unqualified installer.
!
NOTE:
The T&P valve must be manually vented monthly. See
11.2, “Venting the T&P relief valve”, pg. 7.
!
NOTE:
Choose a location that allows easy access for maintenance or servicing.
The water heater should be installed with at least
8˝ (203 mm) of clearance on the top and sides of the unit.
4 | SHC 2.5 / SHC 4 / SHC 6 WWW.STIEBEL-ELTRON-USA.COM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 General Information
- 3 Safety Precautions
- 4 Register your product
- 4 General Description
- 4 Technical Description
- 4 General Recommendations
- 5 Mounting the Unit
- 5 Plumbing Connections
- 6 Filling the Water Heater
- 6 Electrical Connection
- 6 Settings
- 7 Maintenance Instructions
- 7 11.1 Descaling the heating element
- 7 11.2 Venting the T&P relief valve
- 7 11.3 Draining the water heater
- 7 11.4 Removing the cover
- 8 11.5 Removing the heating element
- 8 11.6 De-scaling the heating element
- 8 11.7 Replacing the heating element
- 8 11.8 Changing the anode rod
- 9 11.9 Safety Shut-off
- 9 Technical Data
- 10 12.1 Dimensions, SHC
- 10 12.2 Dimensions, SHC
- 10 12.3 Dimensions, SHC
- 10 12.4 Wiring diagram
- 11 Warranty
- 13 Información general
- 13 Advertencias de seguridad
- 14 Registre su producto
- 14 Descripción general
- 14 Descripción técnica
- 14 Recomendaciones generales
- 15 Cómo montar la unidad
- 15 Conexiones de plomería
- 16 Cómo llenar el calentador de agua
- 17 Conexión eléctrica
- 17 Configuraciones
- 17 Instrucciones de mantenimiento
- 17 11.1 Eliminar el sarro del elemento calefactor
- 18 11.3 Cómo vaciar el calentador de agua
- 18 11.4 Cómo remover la cubierta
- 18 11.5 Cómo remover el elemento calefactor
- 18 11.6 Cómo remover el sarro del elemento calefactor
- 19 11.7 Cómo reemplazar el elemento calefactor
- 19 11.8 Cómo cambiar el ánodo
- 19 11.9 Apagado de seguridad
- 20 Datos técnicos
- 20 12.1 Dimensiones, SHC
- 20 12.2 Dimensiones, SHC
- 21 12.3 Dimensiones, SHC
- 21 12.4 Diagrama eléctrico
- 22 Garantía Limitada
- 24 Généralités
- 24 Mesures de précaution relatives à la sécurité
- 25 Inscrivez votre produit
- 25 Description
- 25 Description technique
- 25 Recommandations générales
- 26 Fixation de l’appareil
- 26 Branchements de plomberie
- 27 Remplissage du chauffe-eau
- 28 Configuration électrique
- 28 Réglages
- 28 Instructions relatives à l’entretien
- 28 11.1 Détartrer l’élément chauffant
- 28 pression et de température
- 29 11.3 Vidange du chauffe-eau
- 29 11.4 Retrait du couvercle
- 29 11.5 Retrait de l’élément chauffant
- 29 11.6 Détartrage de l’élément chauffant
- 30 11.7 Remplacement de l’élément chauffant
- 30 11.8 Remplacement de l’anode
- 30 11.9 Vanne d’isolement de sécurité
- 31 Données techniques
- 31 12.1 Dimensions, SHC
- 31 12.2 Dimensions, SHC
- 32 12.3 Dimensions, SHC
- 32 12.4 Diagramme électrique
- 33 Garantie Limitée