Joint Tech EVM002 Series Electric Vehicle AC Charger User Manual

Le chargeur de véhicule électrique CA Joint Tech série EVM002 offre une charge CA fiable pour votre véhicule électrique. Cet appareil dispose d'une interface conviviale, de multiples protocoles de communication (OCPP 2.0.1, OCPP 1.6Js, ISO15118-2/3) et prend en charge diverses méthodes d'authentification, notamment RFID et Plug&Charge. Il est conçu pour un montage mural et comprend des dispositifs de sécurité robustes tels qu'une protection contre les défauts de terre et une protection contre les surintensités. L'EVM002 possède un indice de protection NEMA 4 (IP65) pour une durabilité en extérieur.

PDF
Document
Manuel Chargeur CA Joint Tech Série EVM002 | Manualzz

Publicité

Publicité

1:1
说明书
技术要求：
1.成品规格： x mm；
2.印刷方式： 单面印刷 ； 双面印刷；
3.装订方式： 骑马钉； 单面对折；
4.材质： 70g双胶纸； 108g铜板纸；
5.印刷颜色： 色；单黑
6.有条码的话，刷码等级需达到B级；
7.检验工具：卷尺，尺寸单位均为mm
EVM002 Series (NA)
2024.09.18
142 210
Electric Vehicle AC Charger
EVM002 Series (NA) - User Manual
Version 1
Electric Vehicle AC Charger
EVM002 Series (NA) - User Manual
USER MANUAL USER MANUAL
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS ................................... 1
2. PRODUCT INTRODUCTIONS................................................... 5
3. VERIFY CONTENTS.................................................................. 8
4. GATHER TOOLS ....................................................................... 9
5. PLAN THE MOUNTING ........................................................... 10
6. WALL MOUNTING................................................................... 11
7. WIRE THE CIRCUIT ................................................................ 14
8. LIGHT CODES ......................................................................... 18
9. FCC DECLARATION ............................................................... 20
10. WARRANTY AND MAINTENANCE....................................... 21
1 2
WARNING & CAUTION
1.2 Installation Requirements
WARNING: Disconnect electrical power prior to installing the charging station.
WARNING: Be sure to preview the user manual and ensure local building and electrical codes
are reviewed before installing the AC charger.
WARNING: The AC charger should be installed by a qualified technician according to the user
manual and local safety regulations.
CAUTION: Use appropriate protection when connecting to the main power distribution cable.
CAUTION: Type B, C or D breaker with the rating current for table should be installed in the
upstream AC distribution box.
CAUTION: The device shall be mounted at height between 2 feet and 4 feet from ground.
CAUTION: Please keep the charger in a clean area with low humidity. Not recommended to
be installed in coastal environments with high humidity or high dust.
1.3 Daily Maintenance
CAUTION: Avoid moisture or water in the charger. If there is water or moisture ingress in the
charger, it is necessary to immediately power off to avoid immediate danger, and notify the
professionals to carry out maintenance before next use.
CAUTION: Please use the charger properly. Do not hit or press hard on the enclosure. If it is
damaged, please contact a professional technician.
CAUTION: Avoid placing the charger near hot objects and at high temperature locations and
away from dangerous substances such as flammable gases and corrosive materials.
CAUTION: Do not put heavy objects on the charger to avoid danger.
WARNING & CAUTION
1. Important Safety Instructions
1.1 Overall Warnings & Cautions
WARNING: To avoid fire, injury or death, carefully read and follow the instructions during
installation, operation and maintenance.
- DO NOT put fingers into the electric vehicle connector.
- DO NOT use this product if the flexible power cord or EV cable is frayed, insulation-broken,
or any other signs of damage.
- DO NOT use this product if the enclosure or the EV connector is broken, cracked, open, or
shows any other indication of damage.
- DO NOT remove cover or attempt to open the enclosure because of risk of electric shock.
WARNING: This device should be supervised when used around children.
WARNING: This device must be grounded.
WARNING: To avoid a risk of fire or electric shock, do not use this device with an extension
cord.
WARNING: The suitability of the use of flexible cord in accordance with CE code, part I, rule
4-012, is to be determined by the local inspection authority.
WARNING: To reduce the risk of fire, connect only to a circuit provided branch circuit
over-current protection in accordance with the CSA C22.1–15 Canadian Electrical Code, Part
1 (Canada) or NOM-001-SEDE Electrical installations (utility) (Mexico) or ANSI / NFPA 70
National Electrical Code (USA).
Circuit Breaker Options table
Output Amperage (A) 16A
20A
32A
40A
40A
50A
48A
60A
70A
90A
80A
100ACircuit Breaker Options (A)
USER MANUAL USER MANUAL
/

Publicité

Fonctionnalités clés

  • Montage mural

  • Protocoles de communication multiples

  • RFID et Plug&Charge

  • Indice de protection NEMA 4 (IP65)

  • Dispositifs de sécurité robustes

Foire aux questions

Selon le document consulté, un disjoncteur de 60A est nécessaire pour une sortie de 48A.

Le document consulté recommande de monter le chargeur entre 2 et 4 pieds du sol.

Le document consulté souligne la nécessité de débrancher l'alimentation électrique avant l'installation et d'utiliser une protection appropriée lors de la connexion au câble de distribution d'alimentation principal.

Le document consulté inclut un tableau décrivant les codes lumineux LED pour indiquer divers états de l'appareil, notamment la mise sous tension, la veille, la charge et les défauts.

Le document consulté indique que la période de garantie est de trois ans.

Préparation du document pour l''impression…
0%