Intended Use. Stinger Medical MC2 26 Amp-Hour, MC2 35 Amp-Hour, MC2, MC2 POWER SYSTEMS

MC

2

Power Systems User's Guide Intended Use

Intended Use

The Stinger Medical workstations and power systems are intended for the continuous non-invasive logging of patient data in hospitals, hospital-type facilities, and intra-hospital transport.

Note:

Hospital use typically covers such areas as general care floors, operating rooms, special procedure areas, intensive and critical care areas within the hospital-type facilities. Hospital-type facilities include physician office-based facilities, sleep labs, skilled nursing facilities, surgical centers, and sub-acute centers.

Intra-hospital transport includes transport of patient within the hospital or hospital-type facility.

Medical and non-medical apparatus such as vital signs monitors, computers, LCD monitors and bar-code scanners may be supplied by Stinger Medical or may be configured locally. The collateral standard for medical electrical systems, IEC 60601-1-1

Second Edition 2000-I2, provides requirements for integrating ITE, such as a printer or monitor, with medical equipment.

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of its contents. This document is subject to change without notice. Stinger Medical provides this information as reference only.

Stinger Medical

1152 Park Avenue

Murfreesboro, TN 37129

888-445-8970 – Toll free

615-896-1652 – Phone

615-896-8906 – Fax http://www.stingermedical.com

November 2006

1110227 Revision 2 vii