Product Safety Information. Stinger Medical MC2 26 Amp-Hour, MC2 35 Amp-Hour, MC2, MC2 POWER SYSTEMS

MC

2

Power Systems User's Guide Product Safety Information

Product Safety Information

Safety Guidelines

The MC² Power System Series™ is designed to ensure both the highest level of product quality and safety for the user. To maintain both quality and safety, follow the guidelines and instructions in this manual.

• Use the power system only as intended.

• Do not place the power system near a window. Exposing the power system to rain, water, moisture, or constant, direct sunlight can severely damage it.

• To maintain your warranty, refer all servicing to Stinger Medical qualified personnel.

The MC² Power System has no user-serviceable, internal parts.

• Do not cover or obstruct any venting holes on the power system.

• Store the power system within 10 to 30 degrees Celsius (50 to 86 degrees

Fahrenheit). Storing the system outside the temperature range could result in permanent damage.

• Use and maintain the cord set provided with the unit.

• If any cord or cable is frayed or damaged, replace it immediately with another of the same type and rating as supplied by Stinger Medical.

• To clean the exterior of the power system, follow the UL 60601-1 standard for use in

a hospital environment. See “ Cleaning Procedures

” for more information.

• Before cleaning the 26 Amp-Hour unit, disconnect the electronic and power enclosures from their power sources.

• Before cleaning the 35 Amp-Hour unit, disconnect the electronic enclosure from its power source.

November 2006

1110227 Revision 2 viii