Chapter 8: Preventative Maintenance. Stinger Medical MC2 26 Amp-Hour, MC2 35 Amp-Hour, MC2, MC2 POWER SYSTEMS

Below you will find brief information for MC2 26 Amp-Hour, MC2 35 Amp-Hour. The MC2 Power System Series™ is designed to ensure both the highest level of product quality and safety for the user. You can use MC2 Power System for continuous non-invasive logging of patient data in hospitals, hospital-type facilities, and intra-hospital transport. The power system is able to power a variety of devices such as vital signs monitors, computers, LCD monitors and bar-code scanners. The user can preconfigure different voltages for each power output channel. The MC2 Power System has no user-serviceable internal parts.

PDF

Document

Key features

Continuous non-invasive logging of patient data
Powers various devices like vital signs monitors, computers, LCD monitors
User-configurable voltage settings for each output channel
Thermal and self-resetting protection
Advanced Monitoring software for detailed information
Suspend mode for long-term storage
Easy to use and maintain
No user-serviceable internal parts
Warranty and support available

Frequently asked questions

Plug the power system into a 120V 60Hz AC power source using a Stinger Medical supplied cord set.

The charge time varies depending on the usage of the power system. Typically, it takes about 6 hours to fully charge with no load.

The output voltage can be set by the user between 12–20V on Power Output 1 and Power Output 3 and between 3.3 – 12V on Power Output 2 and Power Output 4. Refer to the User-selectable Switch Settings section in the manual for detailed instructions.

Follow the No Output Reset Procedure described in the Troubleshooting section. This involves removing devices, waiting for 30-45 seconds, reconnecting devices, and powering them on one at a time.

The Advanced Power Monitor software provides detailed information about the power system's status, including battery level, charging status, and calculated time remaining. It can be used to monitor and manage the power system.

The system has deep discharge protection features that prevent the battery from reaching a level of deep discharge. When the battery is low, the system will shut down and cut off the output voltage.

Yes, it's recommended to clean the air intake filter every quarter. Failure to do so will void the warranty. Refer to the Cleaning Procedures section for instructions on how to clean the system and its filter kit.