2.2.4 Power over Ethernet Powered Device. Planet POE-2400, POE-1200, POE-2400P4, POE-1200P2

Add to My manuals
45 Pages

advertisement

2.2.4 Power over Ethernet Powered Device. Planet POE-2400, POE-1200, POE-2400P4, POE-1200P2 | Manualzz

The PoE Injector Hub supports Data passive mode, that is, even the PoE Injector Hub is manual power off, the data between “DATA” port and “DATA+PoE” port can still be transmitted without data loss.

The PLANET Mid-Span PoE Injector Hub doesn’t support Gigabit data rate. The Ethernet switches or PoE

PDs with Gigabit interface will operate at 100Mpbs Full Duplex mode when connect to the Mid-Span PoE

Injector Hub.

2.2.4 Power over Ethernet Powered Device

3~5 watts

Voice over IP phones

Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet end-devices to the central where UPS is installed for un-interrupt power system and power control system.

6~12 watts

Wireless LAN Access Points

Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can install the

Access Point any where with no hesitation

10~12 watts

3~12 watts

IP Surveillance

Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera without limits of install location – no need electrician to install AC sockets.

PoE Splitter

PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/9/12V DC power output. It frees the device deployment from restrictions due to power outlet locations, which eliminate the costs for additional AC wiring and reduces the installation time.

10

advertisement

Related manuals