advertisement
![3 MANAGEMENT. Planet POE-2400, POE-1200, POE-2400P4, POE-1200P2 | Manualzz 3 MANAGEMENT. Planet POE-2400, POE-1200, POE-2400P4, POE-1200P2 | Manualzz](http://s1.manualzz.com/store/data/007768953_1-9364eefbdf9fbef150a6b5ec4bb58cfd-360x466.png)
3 MANAGEMENT
This chapter describes how to manage the Web Smart PoE Injector Hub. Topics include:
- Overview
- Management method
- Logging on to the Web Smart PoE injector Hub
3.1 Overview
The Web Smart PoE injector Hub provides a user-friendly, Web interface. Using this interface, you can perform various device configuration and management activities, including:
System
Power over Ethernet
Tools
3.2 Requirements
■ Network cables.
Use standard network (UTP) cables with RJ45 connectors.
■ Subscriber PC installed with Ethernet NIC (Network Card)
■ Workstations of subscribers running Windows 98/ME, NT4.0, 2000/2003/XP, MAC OS X or later, Linux, UNIX or other platform compatible with TCP/IP protocols.
■ Above PC installed with WEB Browser and JAVA runtime environment Plug-in
It is recommended to use Internet Explore 6.0 or above to access Web Smart PoE Injector Hub.
3.3 Management Method
User can manage the Web Smart PoE injector Hub by Web Management via a network connection.
3.3.1 Web Management
The PoE Injector Hub can be configured through an Ethernet connection, make sure the manager PC must be set on same the IP subnet address with the PoE Injector Hub.
For example, if you have changed the default IP address of the Device to 192.168.99.123 with subnet mask 255.255.255.0 via console, then the manager PC should be set at 192.168.99.x (where x is a number between 2 and 254) with subnet mask 255.255.255.0. Or you can use the factory default IP address 192.168.0.100 to do the relative configuration on manager PC.
1. Use Internet Explorer 5.0 or above Web browser. Enter IP address http://192.168.0.100 (the factory-default IP address or that you have changed via console) to access the Web interface.
11
Figure 3-1
Web Management over Ethernet
2. When the following login screen appears, please enter the default username "admin" and password “admin” (or the password you have changed via console) to login the main screen of PoE Injector Hub. The login screen in Figure 3-2 appears.
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
The following screen based on POE-2400P4, for POE-1200 / POE-1200P2 / POE-2400 the display will be the same to POE-2400P4.
Figure 3-2
PoE Injector Hub Web Login screen
12
advertisement
Related manuals
advertisement
Table of contents
- 4 1. INTRODUCTION
- 8 2. INSTALLATION
- 8 2.1.1 Injector Front Panel
- 9 2.1.2 LED Indicators
- 10 2.1.3 Injector Rear Panel
- 10 2.2.1 Desktop Installation
- 11 2.2.2 Rack Mounting
- 12 2.2.3 Network Application Installation
- 13 2.2.4 Power over Ethernet Powered Device
- 14 3 MANAGEMENT
- 14 3.3.1 Web Management
- 16 3.3.2 PLANET Smart Discovery Utility
- 18 4 WEB CONFIGURATION
- 20 4.3.1 System Information
- 21 4.3.2 IP Configuration
- 22 4.3.3 Password Setting
- 26 4.5.1 Firmware Upgrade
- 28 4.5.2 Configuration Setting
- 30 4.5.3 Configuration Backup
- 34 4.5.4 Alert Trap Configuration
- 35 4.5.5 System Reboot
- 36 5. POWER OVER ETHERNET OVERVIEW
- 38 6. THE POE PROVISION PROCESS
- 40 7 TROUBLESHOOTING
- 41 APPENDIX A
- 43 APPENDIX B