4.5.4 Alert Trap Configuration. Planet POE-2400, POE-1200, POE-2400P4, POE-1200P2
Add to My manuals45 Pages
advertisement
4.5.4 Alert Trap Configuration
This function displays the PoE Injector Hub alert trap configuration; include “enable” or “disable” the trap mode and set the alert IP address. As showed in Figure 4-26.
Object
Trap mode
Alert IP address
Trap event
PoE SNMP Trap event
• PoE Port On
• PoE AC Disconnect Port Off
• PoE DC Disconnect Port Off
• PoE Overload Port Off
• PoE Short Circuit Port Off
Figure 4-26
Alert Trap Configuration screen
Description
Can choose enable/disable to get the trap.
Assign one IP address of host to get SNMP trap.
Can choose which event can send the SNMP trap. The trap events include:
Cold
Login
Password
IP
PoE
PoE port is supplying the power to the PD
PoE port was turned off, due to AC Disconnect function
PoE port was turned off, due to DC Disconnect function
PoE port off due to overload event
PoE port off due to short circuit event
31
advertisement
Related manuals
advertisement
Table of contents
- 4 1. INTRODUCTION
- 8 2. INSTALLATION
- 8 2.1.1 Injector Front Panel
- 9 2.1.2 LED Indicators
- 10 2.1.3 Injector Rear Panel
- 10 2.2.1 Desktop Installation
- 11 2.2.2 Rack Mounting
- 12 2.2.3 Network Application Installation
- 13 2.2.4 Power over Ethernet Powered Device
- 14 3 MANAGEMENT
- 14 3.3.1 Web Management
- 16 3.3.2 PLANET Smart Discovery Utility
- 18 4 WEB CONFIGURATION
- 20 4.3.1 System Information
- 21 4.3.2 IP Configuration
- 22 4.3.3 Password Setting
- 26 4.5.1 Firmware Upgrade
- 28 4.5.2 Configuration Setting
- 30 4.5.3 Configuration Backup
- 34 4.5.4 Alert Trap Configuration
- 35 4.5.5 System Reboot
- 36 5. POWER OVER ETHERNET OVERVIEW
- 38 6. THE POE PROVISION PROCESS
- 40 7 TROUBLESHOOTING
- 41 APPENDIX A
- 43 APPENDIX B