4.5.3 Configuration Backup. Planet POE-2400, POE-1200, POE-2400P4, POE-1200P2
Add to My manuals45 Pages
advertisement
4.5.3 Configuration Backup
This function allows output the current PoE Injector Hub configuration as a file, and upload it to other PoE injector Hub for quick multi-devices setting. The description of the procedure and screens in following appears. The screen in Figure 4-18 appears.
Figure 4-18 Configuration Backup screen
■
Configuration Download
All current configurations (except IP Configuration) will output as a configuration file once the “Download” button is pressed, save the current configuration in manager workstation and the screen in Figure 4-19 appears.
Figure 4-19 File Download screen
27
Figure 4-20
File save screen
Figure 4-21 File save screen
28
■
Configuration Upload
Click the “Browse” button of the Configuration Backup Web page, the system would pop up the file selection screento choose saved configuration. The screen in Figure 4-22 appears.
Figure 4-22 Windows file selection screen
Select on the configuration file then click “Upload”, the system would pop up the Upload Configuration confirm screen and in Figure 4-23 & 4-24 appears.
Figure 4-23 Configuration Upload screen
29
Figure 4-24 Configuration Upload screen
Then the following Configuration file Uploading screen appears in Figure 4-25 . When the Web login screen appears, please re-login Web interface of PoE Injector Hub for previous system configuration.
Figure 4-25
Configuration Uploading screen
The Configuration Backup function only appears on POE-1200P2 / POE-2400P4.
30
advertisement
Related manuals
advertisement
Table of contents
- 4 1. INTRODUCTION
- 8 2. INSTALLATION
- 8 2.1.1 Injector Front Panel
- 9 2.1.2 LED Indicators
- 10 2.1.3 Injector Rear Panel
- 10 2.2.1 Desktop Installation
- 11 2.2.2 Rack Mounting
- 12 2.2.3 Network Application Installation
- 13 2.2.4 Power over Ethernet Powered Device
- 14 3 MANAGEMENT
- 14 3.3.1 Web Management
- 16 3.3.2 PLANET Smart Discovery Utility
- 18 4 WEB CONFIGURATION
- 20 4.3.1 System Information
- 21 4.3.2 IP Configuration
- 22 4.3.3 Password Setting
- 26 4.5.1 Firmware Upgrade
- 28 4.5.2 Configuration Setting
- 30 4.5.3 Configuration Backup
- 34 4.5.4 Alert Trap Configuration
- 35 4.5.5 System Reboot
- 36 5. POWER OVER ETHERNET OVERVIEW
- 38 6. THE POE PROVISION PROCESS
- 40 7 TROUBLESHOOTING
- 41 APPENDIX A
- 43 APPENDIX B