4.3.2 IP Configuration. Planet POE-2400, POE-1200, POE-2400P4, POE-1200P2

4.3.2 IP Configuration

This section provides DHCP Client, change the IP Address, Subnet Mask, Gateway and Description, the screen in Figure

4-5 appears.

Figure 4-5

IP Configuration screen

The page includes the following configurable data:

Object

DHCP Client

IP Address

Subnet Mask

Gateway

Description

Description

Choose what the PoE Injector Hub should do following power-up: transmit a DHCP request, or manual setting (Disable).

The DHCP client function only works if you haven't assigned a static IP address that different than the PoE Injector Hub default IP. Once the default IP has been changed the DHCP will not effective and the PoE Injector Hub will continue using the manually entered static IP. If you have changed thePoE Injector Hub to a static IP address, you can set the IP address back to its default IP address or you can reset the PoE Injector Hub back to factory default. And then you can enable the DHCP client function to work.

The factory default is Disable.

The IP address of the PoE Injector Hub.. The factory default value is 192.168.0.100.

The IP subnet mask of the PoE Injector Hub.. The factory default value is 255.255.255.0.

The default gateway of the PoE Injector Hub.. The factory default value is 192.168.0.254.

This field helps to identify the description of PoE Injector Hub.

18