LAN Port. DETEWE OpenCom 131, OpenCom 130, OpenCom 150

Installation Connectible Devices

3.12.6 LAN Port

Using the LAN port (Ethernet) you can integrate an OpenCom 100 into your corporate network (local area network), and thus use it, among other things, as an IP router for accessing the Internet.

LAN ports on the expansion module of the OpenCom 130

The LAN ports of the Ethernet switches on the expansion module process Ethernet data traffic with different degrees of priority. You should therefore assign the three

LAN ports on the expansion module as follows:

■ LAN2: Use this port if you cascade a second communications system as a slave

system (see PBX Cascading starting on page 122).

■ LAN1: Here connect the short Ethernet connection line to the basic module.

■ LAN0: You should use the port with the lowest priority to connect to your corporate network.

Both internal LAN ports of the Ethernet switch are reserved for usage on interface cards.

LAN ports of the OpenCom 150

■ LAN1: Use this port if you cascade a second communications system as a slave

system (see PBX Cascading starting on page 122).

■ LAN0: You should use the port with the lowest priority to connect to your corporate network.

57