Connector Module. DETEWE OpenCom 131, OpenCom 130, OpenCom 150

Below you will find brief information for OpenCom 100, OpenCom 130, OpenCom 131, OpenCom 150, OpenCom 510. This guide covers mounting, commissioning, and configuration.The OpenCom 100 family facilitates integrated voice and data communication with a modular design. It supports system telephones, ISDN, and analogue devices. You can use internet and intranet data communication, CTI applications, and can configured this system with a web browser. The system is scalable with expansion modules and interface cards.

PDF

Document

Key features

Modular design for flexible configurations
Integrated voice and data communication
Support for system, ISDN, and analogue phones
Internet/Intranet data communication
CTI application support
Web browser configuration
Available ports
DECT support (OpenCom 130/150)
Cascading capabilities (OpenCom 130/150)

Frequently asked questions

You can connect analogue terminals, Euro-ISDN terminals, ISDN telephones (on the Upn port), DeTeWe system telephones, and DeTeWe RFP 22 and RFP 24 base stations and DECT handsets (via an RFP 22/24 base station on the Upn port of an interface card).

Configuration and programming is performed by means of a Web browser (the Web console) on a connected PC. Remote configuration is also supported.

To connect the OpenCom 100 to existing company hardware, “actor” ports (output) and “sensor” ports (input) can be provided by retrofitting a doorstation interface card. For example, this can be used to operate a door opener and a doorbell via the system.