Modules Overview of Available Modules
7.2
Overview of Available Modules
The following table provides an overview of modules available for the
OpenCom 510:
Name
MPS+1-AC
MC+1-3
MT+S2M1-1
MX+S01-8
Description
Power supply with AC/DC transformer
Central control module with three interfaces
Trunk module with one S
2M
interface for connecting to digital networks or for cascading two PBXs
Trunk or subscriber module with eight S
0
interfaces for either external (trunk) or internal (subscriber) connections
71
MS+UPN1-8 Subscriber module with eight U pn
interfaces for connecting digital terminals (ISDN terminals, system telephones); does not support DECT base stations
MS+UPN2-8 Subscriber module with eight U pn
interfaces for connecting digital terminals (ISDN terminals, system telephones) and DECT base stations
MS+A1-8 Subscriber module with eight a/b interfaces for connecting analogue terminals
MT+A1-4
MG+ETH1-1
73
76
78
Trunk module with four a/b interfaces for connecting to analogue trunk lines
80
Media Gateway module for VoIP
115
Page
62
65
68
The name of the module and the interface type are printed on the front of the modules. The following illustration shows the printing on the MX+S01-8 interface card.
61
