Configuration Guide
18.5
RAS Settings
Have you made the network settings for the OpenCom ?
LAN No
NET Configuration:
LAN
Configure the network settings for the OpenCom.
Configure the RAS access of the
OpenCom. “NET Configuration: RAS”
Yes
RAS Settings
Select from PAP,
CHAP and CLID.
Status
Telephone number
Activate the RAS access.
Specify the telephone number for which the RAS access should be configured.
Authorisation
Number of connections
Specify how many simultaneous connections are possible via this access.
Select the filter lists. Filter lists are created in “NET
Configuration: Firewall”
Filter list IN
Filter list OUT
Have you created users with RAS access rights?
Users
Yes
No
User Manager: Users and User Groups
Configure users that have RAS access rights.
Add internal telephone number to the incoming call distribution scheme.
Finished
Flowchart: Configuring the RAS Settings
197
