Configuring the PC Software Setting up Video Telephony
Installing the browser
1.
Call up the start mask from the product CD (see
Configuring the PC Software on page 181).
2.
From the start mask, select Software : Install Browser for OpenCTI or
Software : Install Browser for OpenHotel . Follow the program instructions.
3.
Follow the program instructions.
After installing the browser, there is a new menu entry in the Windows start menu under Programs : OpenCTI Browser respectively Programs : Hotel Starter .
Further information can be found in the online help of the browser program. To view this, click the top left corner in the OpenCTI -browser’s program window on the system menu symbol or on the symbol in the information area of the task bar.
Select the Readme command. You will find the OpenHotel ’s readme in the installation directory of this browser program.
Note: Both browser programmes can be used simultaneously.
17.6
Setting up Video Telephony
You can use the OpenCTI to switch on the video function during an internal call.
To be able do this, the Microsoft NetMeeting 3.0 program must be installed and set up on all participating workplace computers.
Note: NetMeeting is already pre-installed on the Microsoft
Windows 2000 and XP operating systems.
Set up Microsoft NetMeeting 3.0
1.
Connect a standard web cam to the workplace computer and install the driver.
2.
In the Windows Start menu select Run and enter: “conf.exe”. Confirm your selection with OK .
3.
Follow the instructions of the Install Wizard. Registration in an Internet directory is not necessary and is not recommended. Select the installed web cam and exit the Install Wizard.
188
