4.2.1 Standard. UTStarcom F1000 Series

Menu

4.2 Profiles

Profiles

This submenu enables you to customize the phone alert settings to suit a variety of environments

When you access this submenu, the profile list will be displayed; the current profile will be highlighted. You can customize each profile, and activate the one that suits your environment. The phone will utilize all the current profile’s settings

Standard is the factory-preset profile

4.2.1 Standard

Profiles Standard

4.2.1.1 Enable

Profiles Standard Enable

Select this option to activate the selected profile

4.2.1.2 Set

Profiles Standard Set

This option enables you to change the selected profile’s settings

When you press to browse though the options, the setting of the highlighted option will be displayed in the adjacent bubble. Press the left soft key ( Ok ) to access the highlighted option

Ring Volume

Select this option to adjust the ring volume level for incoming calls and the alarm clock

39

Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560

Menu

There are two volume levels: High and Low . Press to reach the desired volume level, and press the left soft key ( Ok ) to complete the operation

Ring Mode

This function enables you to define how the phone will notify you of incoming calls

The available options include: Ringing , Vibration and Mute . Press to reach the desired ring mode, and press the left soft key ( Ok ) to complete the operation

Ring Tone

This option enables you to select a special ring tone for incoming calls

Press to scroll through the ring tones and listen to a sample of each.

After highlighting the desired ring tone, press the left soft key ( Ok ) to complete the operation

Alarm Tone

This option enables you to select an alarm tone for the alarm clock

Press to scroll through the alarm tones and listen to a sample of each. After highlighting the desired alarm tone, press the left soft key

( Ok ) to complete the operation

Keypad Tone

If this function is activated, when you press any key, the phone will sound a tone. When an operation on the phone is completed or fails, the respective success/failure tone will sound

Select On or Off to activate or deactivate this function

40

Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560