4.3.1 Scheme. UTStarcom F1000 Series

Menu

4.3 Settings

Settings

From this submenu, you can perform various phone settings

4.3.1 Scheme

Settings Scheme

When this option is highlighted, the current setting will be displayed in the adjacent bubble. After accessing this option, you can select from the following options:

4.3.1.1 Static Picture

The standby display will become static after you set this option

After this option is selected, its current setting will be highlighted. To customize a text and display it in standby mode, select User-defined ; to select and display a picture in standby mode, select from the options

Photograph1 ~ Photograph24

If User-defined is selected, enter up to or 12 letters (refer to page 70

“Input Method”), and then press the left soft key ( Ok ) to complete the operation

If one of the options Photograph1 ~ Photograph24 is selected, the corresponding picture will be displayed. You can press to browse through other pictures. When the desired picture is displayed, press the left soft key ( Ok ) to complete the operation

4.3.1.2 Every Hour

The standby display will change every hour in a 24-hour cycle after you set this option. When this option is accessed, these options will be available:

42

Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560