Getting Started. LG CG300 - Cell Phone

CG300 Cingular E_060831_1.1 2006.9.1 2:7 PM 페이지16

Getting Started

Installing the SmartChip

When you subscribe to a cellular network, you are provided with a plug-in SmartChip loaded with your subscription details, such as your PIN, any optional services available and many others.

n

Important!

The plug-in SmartChip and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all

SmartChips out of the reach of small children.

1.

If necessary, switch off the phone by holding down the key until the power-off image displays.

2.

Remove the battery. To do so:

1

Pull and hold the battery lock above the battery toward the top of the phone.

2

Lift the battery away, as shown.

2

1

16

4

3

CG300 Cingular E_060831_1.1 2006.9.1 2:7 PM 페이지17

Getting Started

3.

Slide the SmartChip into the SmartChip socket so that it locks the card into place. Make sure that the notched corner is bottom left and the gold contacts of the card face into the phone.

4. To insert the battery, align the golden contacts of the battery with the corresponding connectors on the battery compartment. Press down on the opposite end of the battery until it snaps into place.

2

1 n

Note

When you need to remove the SmartChip, slide it, as shown, and take it out of the socket.

5. Attach back cover by sliding up into position until it clicks.

4 3

17