PROGRAM menu: Changing switching times. THEBEN TR 610 top2, TR 610 top2 24V, TR 610 top2 G, TR 612 top2, TR 612 top2 24V, TR 611 top2, TR 611 top2 24V, TR 622 top2, TR 622 top2 24V, TR 611 top2 RC 24V

Changing the time to 3:30 pm (proceed to reset the hour from 18 with the ◄ push button to

15 and confirm the change with the OK push button).

The minutes do not have to be changed therefore confirm the 30 minutes with the OK push button.

The text fade-in CHANGE BLOCK now takes place.

Note:

If the entire switch time block is to be changed, i.e. switched off on each weekday at 3:30 pm instead of at 6:30 pm this must be confirmed by using the OK push button.

In the example only the switch-off on Friday should take place at 3:30 pm and on the other weekdays switch-off should continue to be at 6:30 pm.

Therefore, change to text fade-in CHANGE FRIDAY using push button ► .

Confirm the change with the OK push button.

The change is saved and a return is made to the QUERY menu.

Now a new query of the switching times can be performed (OK push button). With the ► push button it is possible to scroll to the END or with the MENU (ESC) push button the menu can be exited.

Note:

If no push button is pressed for more than 1 minute there is an automatic return to the auto mode.

9.3 PROGRAM menu: Changing switching times

It is possible to change switching times in the CHANGE submenu from the QUERY menu or directly in the PROGRAM menu CHANGE.

Example: In the case of channel C1 the switch-off time on Wednesday is to be changed from

6:30 pm to 6:35 pm.

With the MENU push button request the main menu from the auto mode.

Confirm the PROGRAM menu by pressing OK. Press the ► push button twice.

Press the ► push button twice until CHANGE appears on the display and confirm with

OK.

OK push button (if a switching time is to be changed)

Note : With the ► push button it is possible to change from pulses or a cycle program.

With the ► button select the desired channel and then press OK (only for the 2-channel devices).

Page | 23

The first switching time to be saved is displayed.

With the ► push button scroll through the saved switching times until the switching time to be changed is shown.

Press OK push button (to start the change).

Note:

On the weekday numbers it is possible to ascertain that the switch-off time at 6:30 pm to date from

Monday to Thursday (1 - 4) and on Saturday (6) and Sunday (7) is programmed. On Friday the switchoff time is not programmed to 6:30 pm (was changed in section 7.1.2 to 3:30 pm).

Press the OK push button (since the hour displayed - 18 - remains unchanged).

Press ► to adjust the minutes from 30 to 35. Then press the OK push button.

The moving letters MODIFY BLOCK appear.

Press push button ► (not the OK push button since not the whole switching time block but only the switch-off time on Wednesday is to be changed).

The moving letters MODIFY WEDNESDAY appear.

Press OK button.

The return to the MODIFY menu now takes place.

Now other changes can be carried out (OK push button). With the ► push button it is possible to scroll to the END or with the MENU (ESC) push button the menu can be exited.

Page | 24