MANUAL menu: HOLIDAYS. THEBEN TR 610 top2, TR 610 top2 24V, TR 610 top2 G, TR 612 top2, TR 612 top2 24V, TR 611 top2, TR 611 top2 24V, TR 622 top2, TR 622 top2 24V, TR 611 top2 RC 24V

Select the required channel with push buttons ◄ and ►, then press the OK push button.

Press push button ► until TIMER appears on the display and confirm with the OK push button.

With the ◄ and ► push buttons select between switch-on ON and switchoff OFF and confirm with the OK push button accordingly.

Select the sequence duration (hours) with push buttons ◄ and ►, then confirm by pressing the OK push button.

Select the sequence duration (minutes) with push buttons ◄ and ►, then confirm by pressing the OK push button.

After confirmation with the OK push button the timer starts, i.e. in the auto mode C1 or C2 timer is available depending on the channel selected beforehand.

In order to delete a set timer, as with setting the timer in the MANUAL menu the menu item TIMER is selected and this is where the text END TIMER appears. Confirm this with the OK push button and the sequence timer stops.

In the case of activated sequence timer in the TIMER menu item the remaining timer time is displayed as a countdown backwards.

After deleting (confirm END TIMER with the OK push button) the display returns to the auto mode.

11.4 MANUAL menu: HOLIDAYS

For the holiday program, not only is a permanent OFF switching possible however in the case of devices TR 610 top2, TR 612 top2 it is possible to select between a permanent ON or permanent OFF and in devices TR 611 top2, TR 622 top2 between ON, OFF, random 1 and random 2 during holidays.

With the MENU push button request the main menu from the auto mode.

Press the ► push button twice and confirm the MANUAL menu with the OK push button.

Page | 43

With the ◄ and ► push buttons select the desired channel and then press OK (only for the 2-channel devices).

Press push button ► until HOLIDAY appears on the display and confirm with the OK push button.

A direct input start occurs with ON - OFF- selection (for TR 611 top2/TR 622 top2 random 1 and random 2 can also be selected): or with push button

+ ++++++++

►

After confirmation of a selection with the OK push button the holiday date is set:

The holiday program can be programmed with the top2 time switches with the date and the exact time

(Start and end of the holiday program possible for each complete hour), i.e not only at midnight (change in day).

Example : In the case of a switching program which switches on every day at 8.00 am to 10:00 pm the holiday start can be programmed on a working day up to switch off at 1:00 pm.

The settings start with START HOLIDAY. Confirm by pressing OK.

Select the year with push b uttons ◄ and ► and confirm with the OK push button.

Similarly to push buttons ◄ and ► enter the month, day and time for the holiday start and proceed to confirm the desired setting with the OK push button.

The same settings must now be made for the end of the holidays.

Likewise, the desired month, day and time of the holiday end is entered with the push buttons ◄ and ►.

The holiday date is set and there is a return to the menu item HOLIDAYS.

Page | 44