Channel lock. THEBEN TR 610 top2, TR 610 top2 24V, TR 610 top2 G, TR 612 top2, TR 612 top2 24V, TR 611 top2, TR 611 top2 24V, TR 622 top2, TR 622 top2 24V, TR 611 top2 RC 24V

Channel lock

There are situations (at roller shutters, navigation locks, or the like) where two channels must not be switched at the same time! For this purpose, the channels are locked against each other:

12.8 Explanation of the priorities (from high to low):

•

Highest priority: External input: Release

External input: Permanent off

External input: Permanent on

Permanent switching

Holidays

Manual switching

Timer

Cycle

Pulse

Random

•

Lowest priority: Switching times

When an ON switching time and an OFF switching time are programmed at the same time, OFF has priority, i.e. there is no ON switching.

•

Manual switching priorities: o MANUAL is deleted by

▪ modification of the channel status with a program switching command

(switching time, pulse and cycle)

•

At PULSE pulse start and pulse end delete the manual switching

•

At CYCLE each modification to the channel status deletes the manual switching

▪ Modification of the channel status through random switching

▪ Permanent is activated (also via external input)

▪ Timer is activated (also via external input)

▪ Holiday start

▪ OBELISK program is started

Note : Manual switching and TIMER delete each other upon activation.

Page | 61