12.8 OPTIONS: channel combination (only with top3). THEBEN TR 610 top2, TR 610 top2 24V, TR 610 top2 G, TR 612 top2, TR 612 top2 24V, TR 611 top2, TR 611 top2 24V, TR 622 top2, TR 622 top2 24V, TR 611 top2 RC 24V

A return is made to INFO with the OK push button.

Displays 2, 3 and 4 are only visible by selecting push button ►:

Press push button ► in order to access display 2 (battery hours).

(in the example the time switch has run 6.3 hours on battery mode)

Press push button ► in order to access display 3 (mains hours).

(in the example the time switch has run 0.0 hours with the mains connection i.e. the time switch was operated for less than 6 minutes with the mains voltage)

Press push button ► in order to access display 4 (date of the first mains connection).

(in the example the mains connection date 20.08.2007 is shown first. On this date the time switch was operated for the first time)

With push button ► the user goes to END. With push button OK a return is made to the auto mode.

12.8 OPTIONS: channel combination (only with top3)

Channel switching and channel lock for the 2-channel devices (only with TR 622 top3)

The new 2-channel devices have a channel switching and channel locking feature. Channel switching extends the service life and maintenance intervals of lamps for street lighting, for example. Channel locking prevents a channel from using conflicting commands, which could damage connected devices, e.g. forward and reverse for motors.

There are situations where two channels must not be switched at the same time! The channels can be interlocked in this case.

The channel lock can prevent both channels from switching on at the same time.

If one channel is already switched on, the second channel will not switch on until the first channel is switched off and a waiting time of 1 s has passed. If both channels are switched on at the same time, channel 1 has priority.

Page | 59

1

1

1

1 2 1 2

1. Astronomical switch-on at sunset

1

1 1

2. Switch off the second channel at a specific time to save energy and maintain basic lighting.

2 1 2 1

3. Change the switched off channel weekly to use the consumers equally.

2 1 2 1

4. Switch on both channels again in the morning and switch them off astronomically at sunrise.

Page | 60