Switching The Hand-Held On And Off. Psion GM37527RA2041, GM375273RADA

Chapter 2: Basic Checkout

Main Tab

2.5.1 Main Tab

The Main tab is displayed when you tap on the Start>Programs> SCU icon.

Figure 2.7 SCU Main Tab

• Enable/Disable Radio: Enables or disables the radio. This a toggle button; when the radio is enabled, this button reads Disable Radio , and when the radio is disabled, the button reads Enable Radio .

• Active Config: Lists the name(s) of the active configuration profile(s) which are referred to as “configs”. When a config is chosen from the Active

Config drop-down menu, the settings for that config become active.

If ThirdPartyConfig is selected, after the WORKABOUT PRO G2 goes through a power cycle, WZC is used for configuration of the radio. See

“ThirdPartyConfig” on page 26 for details.

• Association Status: Indicates if the radio is associated to an access point. If this is not the case, Association Status indicates the radio status.

• Software Version: This field displays the version of the device driver and the SCU that are running on the WORKABOUT PRO G2.

• About Box: This box provides information about the SCU .

2.5.2 Config Tab

The Config tab allows you to define radio and security settings that are stored in the registry as part of the configuration profile or config .

20 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual