5.11 Scanner Settings. Psion GM37527RA2041, GM375273RADA

Chapter 5: Configuration

The Control Panel

Note: If you are uncertain how to move around a dialog box and make selections, review “Using A Dialog Box” on page 72.

When the WORKABOUT PRO G2 boots up, the startup desktop (shell) is displayed, and any applications stored in the Startup folder start up immediately.

To access the Control Panel :

• Tap on Start>Settings>Control Panel .

If you’re using the keyboard:

• Press [FN/BLUE] [.] to display the

• Highlight Settings in Start Menu , and press the [RIGHT] arrow key to highlight the Control Panel .

• Press the [ENTER] key.

The Control Panel folder contains icons used in the setup of your WORKABOUT

PRO G2.

Figure 5.1 Control Panel

82 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual