6.1.2 Attaching The Pistol Grip. Psion GM37527RA2041, GM375273RADA

Chapter 5: Configuration

Decoded (HHP)

Check Digit

When this parameter is set to Validate only , the integrity of a symbol is checked to ensure that it complies with specified algorithms.

If “Check Digit” is set to Validate and Transmit , the check digit is validated and transmitted with the data.

Setting this parameter to None disables this function.

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 80.

Field Size/Char

Refer to page 143 for details.

5.11.3.16 Matrix 2 of 5

Enabled

Set this parameter to on to enable “Matrix 2 of 5”.

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 80.

Field Size/Char

Refer to page 143 for details.

5.11.3.17 IATA 2 of 5

Enabled

Set this parameter to on to enable “IATA 2 of 5”.

164 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual