advertisement
Set My Duty Status
3.
Tap the serial number of the ELD 50 you are going to use.
If you don’t see it listed, make sure it is powered on, and tap Scan
Again . If you still don’t see it listed, view the Troubleshooting
Your Android™ device will now connect to the ELD via BlueTooth ® , connect to the DriverConnect cloud service, and register the ELD to your company.
4.
Once connected, your Android™ device will display “Connected to:” followed by the ELD serial number. Tap Continue .
DriverConnect User Guide
© 2016-2017, Rand McNally, Inc.
11
Set My Duty Status
Confirm Free Trial
The ELD 50 includes a complimentary
30-day free trial of the Core plan. See
page 88 for information on the different
plan types.
5.
Tap START 30 DAY FREE TRIAL to continue.
To purchase a subscription plan, visit the
DriverConnect portal at https://driverconnect.randmcnally.com
.
Complete Setup
6.
On the Configuration screen, select a rule set and time zone, enter your tractor and trailer number, and select a fuel type to use for this tractor.
You can change this information later
in your Settings. See page 80.
7.
(Optional) Enter your driver’s license information in the Driver’s License
Info section.
8.
Tap DONE, LET’S GET STARTED to complete the setup and view your
DriverConnect User Guide
© 2016-2017, Rand McNally, Inc.
12
Set My Duty Status
Connect a New Account to a DC 200
To connect a new account to a DC 200, you need to call a Rand
McNally support agent at: 1-877-446-4863
The agent will assist you in setting up the DC 200.
If you have a DC 200 and have already been assigned a Company
Code, a Driver ID, and a Password see Get Started with an Existing
DC 200
DriverConnect User Guide
© 2016-2017, Rand McNally, Inc.
13
advertisement