Environment. Puls PIC480.241C-C1, PIC480.241C

PIC480.241C, PIC480.241C-C1

24V, 20A, 480W, S

INGLE

P

HASE

I

NPUT PIANO-Series

15.

E

NVIRONMENT

Operational temperature *) -25°C to +70°C (-13°F to 158°F)

Storage temperature -40°C to +85°C (-40°F to 185°F)

Output de-rating 8W/°C

Humidity **)

Vibration sinusoidal

Shock

Altitude

5 to 95% r.h.

2-17.8Hz: ±1.6mm; 17.8-500Hz: 2g ***)

2 hours / axis ***)

30g 6ms, 20g 11ms ***)

3 bumps / direction, 18 bumps in total

0 to 2000m (0 to 6 560ft)

2000 to 6000m (6 560 to 20 000ft)

Altitude de-rating

Over-voltage category

Degree of pollution

LABS compatibility

30W/1000m or 5°C/1000m

reduce output power according Fig. 15-1

for storage and transportation

55°C to 70°C (131°F to 158°F)

IEC 60068-2-30

IEC 60068-2-6

IEC 60068-2-27 without any restrictions reduce output power or ambient temperature,

see Fig. 15-2

IEC 62103, EN 50178, overvoltage category II

> 2000m (6500ft), see Fig. 15-2

III

II

IEC 62477-1, altitudes up to 2000m altitudes from 2000m to 6000m

2 IEC 62477-1, not conductive

The unit does not release any silicone or other LABS-critical substances and is suitable for use in paint shops.

*) Operational temperature is the same as the ambient or surrounding temperature and is defined as the air temperature 2cm below the unit.

**) Do not energize while condensation is present

***) Tested on a DIN-Rail with a thickness of 1.3mm.

Fig. 15-1 Output current vs. ambient temp.

Allowable Output Current at 24V

20A

15A

10A

5A

0

-25 -10 0

Ambient Temperature

+20 +40 +55 +70°C

Fig. 15-2 Output current vs. altitude

Allowed Output

Current at 24V

24A

20A

16A

12A

8A

4A

0

0

A... Tamb < 55°C

B... Tamb < 45°C

C... Tamb < 35°C

2000 4000

C

B

A

Altitude

6000m

Mar. 2021 / Rev. 1.2 DS-PIC480.241C-EN

All parameters are typical values specified at 24V, 20A output, 230Vac input , 25°C ambient and after a 5 minutes run-in time unless otherwise noted. www.pulspower.com Phone +49 89 9278 0 Germany

12/19