Chapter 3 Installing the Module
Assigning Ethernet Address Parameters, continued
Using the Default
IP Address,
continued
Step
6
Action
Confirm that there is a new entry in the active route table by typing:
C:>route print
7 Verify that a connection is made by typing
C:\>ping 84.0.0.2
Specifying
Address
Parameters
Consult your system administrator to obtain a valid IP address and appropriate gateway and subnet mask, if required. Then follow the instructions in Configuring the Ethernet Address Parameters in Chapter 4.
Continued on next page
38
840 USE 116 00 Version 1.0
