Chapter 9 Maintenance
Responding to Errors, continued
Kernel LED Error
Check for the following Kernel LED error conditions:
If
The Ready LED is on and the Kernel
LED is flashing,
The Ready LED is on and the Kernel
LED is shining steadily,
Either of the above conditions exist,
Then
the module has detected an invalid software image.
an attempt to download a software image has failed and the module is in kernel mode.
download a new NOE Exec (see page
179).
Fault LED
The Fault LED will flash briefly following an error as the module attempts to recover.
140
NOE 771 00
ETHERNET TCP/IP
Active
Fault
Link
Appl
174
840 USE 116 00 Version 1.0
