Chapter 8 Using the Network Options Ethernet Tester
Writing Registers, continued
Writing
Registers
Procedure,
continued
Step Action
7 Type in the data to be written to those registers in the Write Data box.
8
9
Click on the Increment Write Data box if you want the data you have entered to be increased by one with each transaction.
Click on the OK button. The register values will be displayed in the window for this connection.
Read or Write
Request Error.
If you try to read or write registers and an error occurs, the NOE Tester will display a Read Request Error or Write Request Error. The error codes correspond with
MSTR block error codes. For more information, refer to the Ladder Logic Block
Library User Guide, 890 USE 100 00.
170
840 USE 116 00 Version 1.0
