advertisement
After you logged in the device, right click mouse, you can see the short cut menu. Please see Figure
Window split mode: You can select window amount and then select channels.
PTZ: Click it to go to PTZ interface.
Auto focus: It is to set auto focus function. Please make sure the connected network camera supports this function.
Image: Set video corresponding information.
Search: Click it to go to Search interface to search and playback a record file.
Record control: Enable/disable record channel.
Alarm output: It is to set alarm output mode.
Remote: Search and add a remote device.
Alarm output: Generate alarm output signal manually.
Main menu: Go to system main menu interface.
Tips:
Right click mouse to go back to the previous interface.
Figure 3-26
3.5.4 Preview Display Effect Setup
3.5.4.1 Display
From Main Menu->Setting->System->Display, you can go to the following interface. See Figure 3-27.
Here you can set menu and video preview effect. All you operation here does not affect the record file and playback effect.
29
advertisement
Key Features
- Supports up to 128 IP cameras
- Up to 12 Megapixels resolution recording
- H.265+/H.265/H.264+/H.264 video compression
- Up to 16 SATA HDDs, up to 16TB capacity per HDD
- Dual OS design to ensure high reliability of system running
- Built-in redundancy to minimize the risk of data loss
- Various alarm input/output interfaces
- Mobile remote access via free app on iOS and Android
- ONVIF conformance ensuring compatibility with various IP cameras
- HDMI and VGA outputs for local monitoring
Related manuals
Frequently Answers and Questions
How many cameras can be connected to the NVR?
What is the maximum resolution supported by the NVR?
What video compression formats are supported by the NVR?
How many HDDs can be installed in the NVR?
What is the maximum capacity of each HDD supported by the NVR?
Does the NVR support mobile remote access?
Is the NVR ONVIF compliant?
advertisement