Setting. IC Realtime NVR-8128K-DR

4.8.5 Setting

4.8.5.1 General

The general interface includes general, date/time and holiday setup.

4.8.5.1.1 General

From main menu->Setup->System->General->General, the general interface is shown as in Figure 4-87.

Figure 4-87

Please refer to the following sheet for detailed information.

Parameter Function

Device ID

It is to set device name.

Device No. It is device channel number.

Language You can select the language from the dropdown list.

Please note the device needs to reboot to get the modification activated.

Video

Standard

HDD full

This is to display video standard such as PAL.

Here is for you to select working mode when hard disk is full. There are two options: stop recording or rewrite. If current working HDD is overwritten or the current HDD is full while the next HDD is no empty, then system stops recording, If the current HDD is full and then next

HDD is not empty, then system overwrites the previous files.

Here is for you to specify record duration. The value ranges from 1 to

120 minutes. Default value is 60 minutes.

Pack duration

4.8.5.1.2 Date and time

From main menu->Setup->System->General->Date and time, the date and time interface is shown as in

Figure 4-88

175

Figure 4-88

Please refer to the following sheet for detailed information.

Parameter Function

Date format Here you can select date format from the dropdown list.

There are two options: 24-H and 12-H.

Time

Format

Time zone

The time zone of the device.

It is to set system time. It becomes valid after you set.

System time

Sync PC You can click this button to save the system time as your PC current time.

DST

NTP

Here you can set day night save time begin time and end time. You can set according to the date format or according to the week format.

You can check the box to enable NTP function.

NTP server You can set the time server address.

Port

It is to set the time server port.

Interval

It is to set the sync periods between the device and the time server.

4.8.5.1.3 Holiday Setup

From main menu->Setup->System->General->Holiday, holiday setup interface is shown as in Figure

4-89.

Here you can click Add holidays box to add a new holiday and then click Save button to save.

176