Overlay. IC Realtime NVR-8128K-DR

IC Realtime NVR-8128K-DR is an advanced Network Video Recorder with enterprise-grade features and rich interfaces to meet the demanding requirements of professional surveillance systems. It supports up to 128 network cameras providing the ability to manage a large number of video feeds simultaneously. The NVR is equipped with powerful hardware including a high-performance processor and ample memory ensuring smooth operation and fast response times even under heavy loads. It supports various recording modes, video compression formats, and storage options providing flexibility and cost-effectiveness. With advanced features like motion detection, alarm management, and event notifications, it offers a comprehensive security solution for various applications like retail stores, offices, schools, and residential buildings.

 Channel: Select the channel you want.

 Type: Please select from the dropdown list. There are three options: regular/motion detect/alarm.

You can set the various encode parameters for different record types.

 Compression: System supports H.264, MPEG4, MJPEG and etc.

 Resolution: The mainstream resolution type is IPC’s encoding config. Generally there is

D1/720P/1080P.

 Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.

 Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.

 Video/audio: You can enable or disable the video/audio. Please note, once you enable audio function for one channel, system may enable audio function of the rest channels by default.

 Copy：After you complete the setup, you can click Copy button to copy current setup to other

channel(s). You can see an interface is shown as in Figure 3-48. You can see current channel

number is grey. Please check the number to select the channel or you can check the box ALL.

Please click the OK button in Figure 3-48 and Figure 3-42 respectively to complete the setup. Please

note, once you check the All box, you set same encode setup for all channels. Audio/video enable box, overlay button and the copy button is shield.

Please highlight icon to select the corresponding function.

Figure 3-41

3.7.1.2 Overlay

Click overlay button, you can see an interface is shown in Figure 3-42.

 Cover area: Here is for you to cover area section. You can drag you mouse to set proper section size.

In one channel video, system max supports 4 zones in one channel. You can set with Fn button or direction buttons.