Upgrade. IC Realtime NVR-8128K-DR

IC Realtime NVR-8128K-DR is an advanced Network Video Recorder with enterprise-grade features and rich interfaces to meet the demanding requirements of professional surveillance systems. It supports up to 128 network cameras providing the ability to manage a large number of video feeds simultaneously. The NVR is equipped with powerful hardware including a high-performance processor and ample memory ensuring smooth operation and fast response times even under heavy loads. It supports various recording modes, video compression formats, and storage options providing flexibility and cost-effectiveness. With advanced features like motion detection, alarm management, and event notifications, it offers a comprehensive security solution for various applications like retail stores, offices, schools, and residential buildings.

Figure 4-103

4.8.5.9 Upgrade

From main menu->Setup->System->upgrade, the upgrade interface is shown as in Figure 4-104.

Please select the upgrade file and then click the update button to begin update. Please note the file name shall be as *.bin. During the upgrade process, do not unplug the power cable, network cable, or shutdown the device.

Important

Improper upgrade program may result in device malfunction! Please make sure the operation is operated under the supervision of the professional engineer!

Figure 4-104

4.8.6 Cluster Service

The Cluster service is a system component used to control activities on a single node. When one or several device(s) are malfunction, it can switch to the slave device to replace the work accordingly.

There are two standards when the master device is malfunction: 1) Device is offline. 2) Device storage is damaged.

Important

Please go to the WEB of the slave device to set the cluster setup of the master device and slave device .

4.8.6.1 Master Device

From main menu->Setup->Cluster service->Master device, you can go to the following interface. See

Figure 4-105.

185

In this interface, you can add several master devices manually. After you enable the cluster function, you can view device IP, work status. Click operation button, you can view the connection log of the main

device. See Figure 4-105.

Figure 4-105

Click Manual add, the interface is shown as below. See Figure 4-106.

Figure 4-106

Click

to view event occurrence time, name, operation and reason. See Figure 4-107.

186