Selecting system mode. Honeywell RTH6580, RTH6580WF, RTH6500WF Wi-Fi Series


Add to My manuals
140 Pages

advertisement

Selecting system mode. Honeywell RTH6580, RTH6580WF, RTH6500WF Wi-Fi Series | Manualzz

Selecting system mode

Press

System

to select:

Heat: Controls only the heating system.

Cool: Controls only the cooling system.

Off: Heating/cooling systems are off.

Auto: Selects heating or cooling depending on the indoor temperature.

Em Heat (heat pumps with aux. heat):

Controls auxiliary/emergency heat.

Compressor is off.

MCR33880

Note:

Depending on how your thermostat was installed, you may not see all system settings.

69-2718EF—01

38

advertisement

Key Features

  • Remote access and control via the Internet
  • Smart Response Technology learns your heating and cooling patterns
  • Compressor protection helps to prevent damage to your air conditioner
  • Programmable with up to four different temperature settings per day
  • Can be set to automatically switch between heating and cooling modes
  • Permanent override button allows you to temporarily override the programmed settings

Related manuals

Frequently Answers and Questions

How do I connect the thermostat to my Wi-Fi network?
See pages 26–30 of the User Guide.
How do I register my thermostat online?
See pages 31–35 of the User Guide.
How do I set the time and day on the thermostat?
See page 36 of the User Guide.
How do I set the fan settings on the thermostat?
See page 37 of the User Guide.
How do I select the system mode on the thermostat?
See page 38 of the User Guide.
How do I adjust the program schedules on the thermostat?
See pages 39–41 of the User Guide.
How do I override the schedules temporarily on the thermostat?
See page 40 of the User Guide.