advertisement
▼
Scroll to page 2
of
62
22
TracVision M5/M7 User’s Guide
Chapter 3 - Settings
Setting Latitude and Longitude
Follow the instructions below if you wish to set your latitude and longitude data.
TIP: For your convenience, you can determine your approximate latitude and longitude using the Position Grids provided in
1. Connect a PC to the maintenance port, as described in
“Connecting a PC to the Maintenance Port” on page 19
.
Then type the following commands in the
HyperTerminal window.
2. Type
HALT
then press Enter.
3. Type the following
GPS
command then press Enter.
GPS,
XX,D,YYY,Z
Field Description
XX
D
YYY
Z
Your latitude (0-90)
S (South) or N (North)
Your longitude (0-180)
E (East) or W (West)
4. Type
ZAP
then press Enter to restart the antenna. Wait one minute for the antenna to initialize.
advertisement
Key Features
- Automatic satellite acquisition and tracking
- Easy channel and satellite switching
- Compact and lightweight design
- Weather-resistant construction
- Multiple receiver support
- Sleep mode for power saving
- User-defined satellite programming
- PC connectivity for advanced control
Related manuals
Frequently Answers and Questions
How do I connect my receiver to the switchplate?
Refer to the wiring diagrams in Appendix A or B of the user's guide.
How do I change the satellite that I'm watching?
Use the switchplate to select the desired satellite.
How do I set the sleep mode?
Refer to the 'Settings' chapter of the user's guide.
How do I troubleshoot a problem with my switchplate?
Refer to the 'Troubleshooting' chapter of the user's guide.