advertisement
EN 20
2.3.7 Expand x 10
7000 SERIES INDICATORS
This icon toggles the weight display between standard and expanded mode. When this icon is selected and
ENTER pressed, the weight display appears. The appearance of the expanded display differs, depending on whether or not the terminal is approved:
Non-Approved
Mode
An extra digit of resolution is added to the main weight display (e.g. 123.45 becomes 123.456) and the x10 indicator appears in place of the range symbol.
The PRINT function prints weights in the expanded format.
Approved Mode An extra digit of resolution is added to the main weight display, in a smaller size (e.g. 123.45 becomes 123.45
6
).
The range symbols operate normally.
The PRINT function is disabled.
2.3.8 Information Recall
The information recall function is always available in the operator menu. In the Operator Menu, select the
Information Recall icon and press ENTER, to recall specific information about the terminal. The RECALL screen displays, with two screens of information available. Move between the two screens by pressing the UP and DOWN
sequence in which they appear. Some items may not appear, depending on the configuration of the terminal. Press the LEFT arrow key to exit the RECALL screen.
Figure 2-10: Information Recall Screens
Table 2-8: Information Recall Menu Items
Item
Model
Value/Explanation
The model number of the terminal is shown.
Serial No. Serial number of the terminal as entered in the setup mode.
Option 1
Shows installed hardware options, if any.
Option 2
Firmware Shows the firmware revision number.
Service
A telephone number used to contact OHAUS CORPORTATION authorized service.
Approved
Yes or No
Indicates whether the terminal has been programmed as Approved for use in legal for trade applications.
Certificate
#
Displays approval certificate number.
Calibrated Shows date of most recent calibration.
IP
Address
IP address assigned to the terminal.
advertisement
Related manuals
advertisement