Status
Services
This section shows the status of AirLink services, including the ACEmanager access level.
Figure 3-8: ACEmanager: Status > Services
Field
AMS
OTA ACEmanager
Access
Tethered Host
ACEmanager Access
WiFi ACEmanager
Access
Enable time update
PinPoint Low Power
Mode State
Description
Indicates the status of the AirLink Management Services: Enabled or Not Enabled
Indicates the over-the-air ACEmanager access mode.
Tethered means Ethernet, USB, or RS232 is physically connected.
Indicates the WiFi ACEmanager access.
Indicates if daily SNTP updates of the system time are enabled or disabled.
Current power state (only available on MP and PP lines).
Rev. 6 May.13
37
