ALEOS User Guide
MODBUS Address List
Table F-28: Serial > MODBUS Address List Commands
Command Description
Decimal[0xHex]=...
Index is decimal. Prefix index with 0x for hex index. 10=... is the same as 0xA=...
Applications
Garmin
Table F-29: Applications > Garmin Commands
Command Description
*GARMINSATTACH
*GARMINSTATUS
Enable attached Garmin GPS device.
Status of the externally connect Garmin device.
•
Not connected
•
Not connected/not reporting
•
Connected/not reporting
•
Not enabled
I/O
I/O includes configuration commands for the digital inputs and relay outputs.
Some values shown as a part of this group are not changeable but reflect the current status. Only those devices with available inputs and outputs will display this group.
Current State
Table F-30: I/O > Current StateCommands
Command Description
*DIGITALIN1
*DIGITALIN2
*DIGITALIN2
*DIGITALIN4
*RELAYOUT1
*RELAYOUT2
Query individual digital inputs. The digital inputs report either a 0 (open) or 1 (closed).
•
n=1–4 Input number
Set or query the relay outputs.
•
n=1–2 Input number
•
s=OPEN or CLOSED
280 4112515
