ALEOS User Guide
Table 13-1: I/O
Field
Digital IN #
Pulse Count #
Transformed
Analog # (Volts)
Relay Output
Description
Query individual digital inputs. The digital inputs report either a 0 (open) or 1 (closed).
•
n= 1–4 Input number
On devices with a digital input that can be configured for use as a digital output, the pulse count will also reflect output changes.
Query individual analog inputs. The analog inputs report the voltage in volts.
•
n= 1–4 Input number
Transformed Analog # is derived from your coefficient and raw analog.
For example, if your Analog In1 is 2 and Coefficient is 4, with an Offset setting of 2
(definition as below), the Transformed Analog will be 10.
Set or query the relay outputs. Options:
•
OFF (default)
•
Drive Active Low
Configuration
To enhance the usability of the I/O, Configuration allows you to set an initial value for the output relays and a coefficient, offset, and unit label for the analog in.
Figure 13-2: ACEmanager: IO > Configuration
158 4112515
